|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
|
|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
I have a SIT-3. I understand that it mates best with 4 ohm loads. I'm trying to find out if the amplifier is compatible with some 8 ohm loads. I am considering the Focal Kanta speakers that are 8 ohms and dip down to 4. The Focal Sopra 1 have been reviewed well with a 12w Valvet singled end solid state. I know there are other factors aside from impedance and efficiency but I'm not clear on the topic.
This post is made possible by the generous support of people like you and our sponsors:
Topic - First Watt SIT-3, proper speaker matching - Vangelis 18:39:43 03/13/19 (14)
- RE: First Watt SIT-3, proper speaker matching - Shakey 04:05:17 04/02/19 (0)
- RE: First Watt SIT-3, proper speaker matching - RGA 00:23:25 03/15/19 (1)
- RE: First Watt SIT-3, proper speaker matching - Vangelis 07:52:23 03/15/19 (0)
- RE: First Watt SIT-3, proper speaker matching - pictureguy 16:46:27 03/14/19 (4)
- RE: First Watt SIT-3, proper speaker matching - BenM 17:57:24 03/14/19 (3)
- RE: First Watt SIT-3, proper speaker matching - pictureguy 18:38:20 03/14/19 (2)
- RE: First Watt SIT-3, proper speaker matching - BenM 18:47:17 03/14/19 (1)
- RE: First Watt SIT-3, proper speaker matching - pictureguy 19:25:33 03/14/19 (0)
- Your 'understanding' is incorrect.. - bare 16:15:13 03/14/19 (0)
- RE: First Watt SIT-3, proper speaker matching - Mr_Steady 05:52:38 03/14/19 (1)
- RE: First Watt SIT-3, proper speaker matching - Vangelis 18:28:45 03/14/19 (0)
- RE: First Watt SIT-3, proper speaker matching - jnr 23:57:46 03/13/19 (1)
- RE: First Watt SIT-3, proper speaker matching - Vangelis 20:14:28 03/14/19 (0)
- Both those Focal models were voiced on Naim kit... - viridian 21:42:06 03/13/19 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
