88.97.21.18
This Post Has Been Edited by the Author
In Reply to: RE: Rega brio pairing posted by BMWDoctor on April 02, 2017 at 13:46:16
" My only real question is my current receiver is rated at 105w per channel and I'm pretty sure the rega is 50w. Will I notice a significant power drop in my playback?"
I doubt that you will notice much difference due to the comparative maximum power output of the amps per se. It only amounts to roughly 3dB. The speaker is rated as suitable for amps rated at 25 - 125 watts. The Brio is rated at 50 watts RMS into 8 Ohms but the Dali is nominaly 6 ohms so the amp may deliver a little more. The Yamaha seems not to be specified in terms of either RMS or impedence so I suspect it actually delivers less than 105W into a 6 or 8 ohm impedenc and probably actually delivers less than the Brio, otherwise there would be no need for them to be so shy about it.
So in real life the Brio is possibly the more muscular amp.
Follow Ups:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2017, Audio Asylum, all rights reserved ]
[ Take5 ]