Looking for a new Amp or Preamp? If you're after tubes, post over here.
In Reply to: Amp Case Issue posted by Fal on June 27, 2017 at 17:28:04:
I would try some of the suggestions already offered. Pledge used to make a product specifically formulated for electronics, but I don't know if it is still available. I don't see it in their current product listing.
If you don't get the desired results with the cleaners noted, I would be inclined to try pure carnauba wax used for cars. Apply a thin coat on the top of the cover, let it dry and buff with a microfiber cloth. Remove the cover before doing this as you don't want dried wax residue going through the vent holes to the interior of the amp. It may give more of a shine to the surface than before.
Others can weigh in as to whether there could be any detrimental effects of using this, but it in its pure form the carnauba wax does not contain other chemicals. The carnauba wax can be removed with a solution of regular liquid dishwashing detergent if need be.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Amp Case Issue - Fal 17:28:04 06/27/17 (16)
- RE: Amp Case Issue - akolegov 10:07:02 07/02/17 (1)
- RE: Amp Case Issue - Fal 13:23:22 07/02/17 (0)
- The components inside are not delicate flowers - mr.bear 13:35:29 06/30/17 (0)
- RE: Amp Case Issue - R Browne 09:46:20 06/29/17 (3)
- RE: Amp Case Issue ?? - bare 16:33:04 06/29/17 (2)
- First try a slightly damp microfibre cloth before moving onto more exotic fluids (nt) - 13th Duke of Wymbourne 12:09:20 06/28/17 (0)
- RE: Amp Case Issue - Douger 07:01:50 06/28/17 (1)
- Simple Green, ain't... - mr.bear 13:22:35 06/30/17 (0)
- RE: Amp Case Issue - The Dill 17:53:30 06/27/17 (5)