|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
|
|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: RE: Need Help with Volume Issue (Long) posted by JimC on January 31, 2017 at 19:03:02:
> Do I understand your suggestion to be that I should ..... measure the voltage at the line out?
If you want to know the maximum output voltage of your Sony HAP S1's fixed line-level output, you will need to send a full-scale 1000-Hz sinusoidal digital test signal into one of its DAC inputs and measure the voltage at its line-level analog output. Otherwise, contact Sony and see if they will tell you its output voltage specification.
On the other hand, if you think your Sony HAP S1 is defective, contact Sony for repair service.
Good luck,
John Elison
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Need Help with Volume Issue (Long) - John Elison 19:58:12 01/31/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
