Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: RE: Best Subwoofer Connection posted by RandyB&W on January 2, 2017 at 17:18:20:
By external crossover, do you mean the one in the e110?
You do not want to run the mains full-range. Connect the preamp output to the sub's line in and the sub's line out to the power amps.
"Analog inputs are provided for unbalanced line-level signals or speaker level signals. Dedicated line outputs are included to make a bi-amped system arrangement with no additional hardware required. Useful in combating ground-related noise problems, a rear panel switch configures the line level inputs as grounded or isolated.
The E-Sub's active crossover is a true two-way, 4th order Linkwitz-Riley design, with a low-pass filter feeding the subwoofer's amplifier and a high-pass filtered signal exiting its line outputs."
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Best Subwoofer Connection - Kal Rubinson 18:33:38 01/02/17 (1)
- RE: Best Subwoofer Connection - RandyB&W 18:45:10 01/02/17 (0)