Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: RE: Too much noise? posted by A.Wayne on December 21, 2016 at 08:26:20:
From your statement, I do not know what the particular amp was nor how it was being used.
My experience with more than a half dozen built-in Class D subwoofer amps over more than 10 years has been with incident; the only unstable oscillatory behavior I have had was due to a faulty internal power supply wire.
My experience with stand-alone Class D goes back to the old Tri-Path amps which sounded better than I expected through ICE-Power amps to current designs including the nCore-based ones. A total of about a dozen. None have ever misbehaved and have progressively improved to the point where, today, they are competitive with A/B amps.
If you don't like 'em, OK.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Too much noise? - Kal Rubinson 17:06:26 12/21/16 (19)
- RE: Too much noise? - A.Wayne 18:50:12 12/22/16 (18)
- RE: Too much noise? - Kal Rubinson 19:23:31 12/22/16 (17)
- RE: Too much noise? - A.Wayne 11:01:23 12/26/16 (12)
- Not all Class D amps use SMPS. (NT) - Kal Rubinson 11:43:38 12/26/16 (11)
- RE: Not all Class D amps use SMPS. (NT) - A.Wayne 13:27:54 12/26/16 (10)
- I do not see that there is such a constraint on this discussion. - Kal Rubinson 14:20:53 12/26/16 (9)
- RE: I do not see that there is such a constraint on this discussion. - A.Wayne 09:00:55 12/29/16 (7)
- OK but..................... - Kal Rubinson 12:40:55 12/29/16 (6)
- Technology moves forward.. - Freo-1 13:50:20 12/29/16 (5)
- RE: Technology moves forward.. - A.Wayne 17:47:23 12/29/16 (4)
- RE: Technology moves forward.. - Freo-1 18:09:57 12/29/16 (2)
- RE: Technology moves forward.. - A.Wayne 14:40:05 01/15/17 (1)
- Agree about performance - Freo-1 15:56:31 01/15/17 (0)
- If you want to try some....................... - Kal Rubinson 18:06:08 12/29/16 (0)
- RE: I do not see that there is such a constraint on this discussion. - Freo-1 08:03:09 12/27/16 (0)
- RE: Too much noise? - pictureguy 18:47:21 12/24/16 (2)
- RE: Too much noise? - A.Wayne 10:51:07 12/25/16 (1)
- RE: Too much noise? - pictureguy 12:55:18 12/25/16 (0)
- RE: Too much noise? - A.Wayne 08:16:25 12/23/16 (0)