Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: RE: Class D -- Thanks, All, and I'll Come Clean . . . posted by goldenthal on December 20, 2016 at 14:55:32:
Modern Class D amps do not throw significant noise back on the line (which can be blocked if necessary) nor do they radiate any significant noise into the room. For subwoofing, they are ideal and, if you don't trust the plate amps that are built into subs, there are really good separates ones.
And, if you go to some real subwoofers, there are better options than the SMS.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Too much noise? - Kal Rubinson 18:41:51 12/20/16 (24)
- RE: Too much noise? - A.Wayne 08:26:20 12/21/16 (20)
- RE: Too much noise? - Kal Rubinson 17:06:26 12/21/16 (19)
- RE: Too much noise? - A.Wayne 18:50:12 12/22/16 (18)
- RE: Too much noise? - Kal Rubinson 19:23:31 12/22/16 (17)
- RE: Too much noise? - A.Wayne 11:01:23 12/26/16 (12)
- Not all Class D amps use SMPS. (NT) - Kal Rubinson 11:43:38 12/26/16 (11)
- RE: Not all Class D amps use SMPS. (NT) - A.Wayne 13:27:54 12/26/16 (10)
- I do not see that there is such a constraint on this discussion. - Kal Rubinson 14:20:53 12/26/16 (9)
- RE: I do not see that there is such a constraint on this discussion. - A.Wayne 09:00:55 12/29/16 (7)
- OK but..................... - Kal Rubinson 12:40:55 12/29/16 (6)
- Technology moves forward.. - Freo-1 13:50:20 12/29/16 (5)
- RE: Technology moves forward.. - A.Wayne 17:47:23 12/29/16 (4)
- RE: Technology moves forward.. - Freo-1 18:09:57 12/29/16 (2)
- RE: Technology moves forward.. - A.Wayne 14:40:05 01/15/17 (1)
- Agree about performance - Freo-1 15:56:31 01/15/17 (0)
- If you want to try some....................... - Kal Rubinson 18:06:08 12/29/16 (0)
- RE: I do not see that there is such a constraint on this discussion. - Freo-1 08:03:09 12/27/16 (0)
- RE: Too much noise? - pictureguy 18:47:21 12/24/16 (2)
- RE: Too much noise? - A.Wayne 10:51:07 12/25/16 (1)
- RE: Too much noise? - pictureguy 12:55:18 12/25/16 (0)
- RE: Too much noise? - A.Wayne 08:16:25 12/23/16 (0)
- RE: Too much noise? - goldenthal 19:14:06 12/20/16 (2)
- RE: Too much noise? - pictureguy 13:24:58 01/15/17 (0)
- Exactly. (NT) - Kal Rubinson 20:32:31 12/20/16 (0)