Home Amp/Preamp Asylum

Looking for a new Amp or Preamp? If you're after tubes, post over here.

RE: Theory vs. Practice & Reality

Thanks for the response. I will replace the main capacitors which are currently 10,000 uF each. Have kind of narrowed it down to these three, and am still thinking on the best choice:

A - 10,000 uF, B41456B9109M, EPCOS, ESR = 0.009 ohms
B - 18,000 uF, E36D750MLN183TC79M, United Chemicon, ESR = 0.022 ohms
C - 30,000 uF, DCMC303U075BC2B, CDE, ESR = 0.015 ohms

Also still struggling with the value of a small film cap in parallel with any of these big guys. A 1 uF cap is not going to significantly change the impedance even at high frequencies.
Ron


This post is made possible by the generous support of people like you and our sponsors:
  The Cable Cooker  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.