|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
|
|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: speaker cable recommendations for Ps audio m700 and 2.7qr? posted by Audio Adrenaline on November 11, 2022 at 23:00:35:
My suggestion, Anthony is my multiple, teflon-coated, solid-core copper wires.
The number of individual solid-core wires for each run (to the +ve & -ve spkr terminals) depends on the length of the cables.
You will never actually pass 700w into the 2.7s ... the reason your M700s will do a good job on the spkrs is bcoz they can pass current, to set these inefficient spkrs alive.
So, I would say:
* if they're 3m or less ... then 8 solid-core strands to each of the +ve and -ve terminals will be sufficient.
* if they're 3-5m then 12 solid-core strands should be used
* and if they're 5+m then 16 strands are needed.
Andy
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: speaker cable recommendations for Ps audio m700 and 2.7qr? - andyr 02:13:06 11/14/22 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
