|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
|
|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: RE: Don't forget ... posted by skypop on January 8, 2022 at 14:42:16:
... as you are just replacing the external (bass panels/mids+tweeters) XO box.
Yes, you can do this with a 2-way active XO ... but this means you are:
* using the subs' own LP filter
* and running the 3.6s full range.
But a better arrangement, I suggest - which you can do with a miniDSP unit - is to apply a HP filter to the bass panels. This:
a. reduces the distortion that the single-ended bass panels have when they excurt at low frequencies (and get (relatively!) far away from the magnets), and
b. lessens the load on the amplifier driving the bass panels.
Andy
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: "just the 2 way with the sub outputs" ... - andyr 15:15:53 01/08/22 (2)
- RE: "just the 2 way with the sub outputs" ... - skypop 17:17:55 01/08/22 (1)
- RE: "Xackly!" nt - andyr 21:50:48 01/08/22 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
