In Reply to: RE: Just as a matter of interest ... posted by MBerry6 on November 25, 2021 at 03:54:37:
Be aware you can't implement a HP filter on the LRSs if you use REL's "high-level" connections to the subs.The only way it will work is by feeding the output from your preamp into a 2-way active XO and then feeding:
* the low pass output into the low-level inputs (RCAs) on your subs, and
* the high pass outputs into the amp driving the LRSs.Using something like a miniDSP 2x4HD would allow you to play with different roll-off frequencies, to decide which delivered the best sound; I would suggest you start off at 24dB L-R @ 60Hz.
Andy
Edits: 11/26/21
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Just as a matter of interest ... - andyr 13:05:53 11/25/21 (1)
- RE: Just as a matter of interest ... - MBerry6 13:50:08 11/26/21 (0)