In Reply to: RE: Only ever rewired a pair of SMGs, but? posted by wtgraham1 on October 5, 2021 at 12:34:40:
... making sure you run the wire along the lines of holes (ie. centred between the magnet strips).
Once all the wire is laid - use a 6v or 12v SLA (with a 5w or 10w series resistor to limit the current flow to, say, 250ma) to pass current through the wire and cause it to be attracted to the magnets.
Andy
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: The main difficulty is ... - andyr 16:07:46 10/05/21 (0)