|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
|
|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: Chinese-Made Tube Amps for Magnepan 3.6R posted by peter3 on March 8, 2021 at 09:45:57:
I wanted to point out ONE minor glitch with what the OP wrote.
the 3.6 is not 'pure' resistive.
A reasonable amount of reactance rears its ugly head.
See link from Stereophile Measured data......
the rising inductance is NO PROGLEM and overall, the panel DOES represent a decent, easy 4 ohm load.
Please see link for measured data.
But one point that is at variance? Magnepan calls out 86db sensitivity at 2.83 volts. That is actually 2 watts at 4 ohms.. so the REAL sensitivity is closer to 83db
2v @4ohms = 1 watt
2.83v @8ohms = 1 watt.
Except for the stellar low sensitivty, a fairly easy load for any competent 4ohm capable amplifier.
Too much is never enough
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Chinese-Made Tube Amps for Magnepan 3.6R - pictureguy 22:11:07 03/31/21 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
