In Reply to: Digital Crossover for 1.7's - Needed? posted by Radiohead on June 27, 2020 at 17:50:14:
as well as providing a 3-way XO for my Maggies. :-))
Works very well.
Currently, I'm using a 10x10HD but using the digital input - which enables me to run it at 96kHz. However, I'm about to change to a nanoDIGI; this has digital input and 4 (stereo) digital outputs ... so I will use 4x Topping E30s to give me 8x analogue output channels.
So I get what the 10x10HD gives me now ... but with higher quality DACs.
Andy
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Yes, I use a miniDSP to send (80Hz to subs and .80Hz to Maggies ... - andyr 16:46:35 07/02/20 (10)
- RE: Yes, I use a miniDSP to send (80Hz to subs and .80Hz to Maggies ... - dumpingground 08:11:48 07/31/20 (0)
- RE: Yes, I use a miniDSP to send (80Hz to subs and .80Hz to Maggies ... - Roger Gustavsson 01:37:22 07/31/20 (3)
- RE: "Where do you set the volume in your new setup" ... - andyr 02:02:29 07/31/20 (2)
- RE: "Where do you set the volume in your new setup" ... - Roger Gustavsson 06:34:18 07/31/20 (1)
- RE: Aah, OK - thanks, Roger. nt - andyr 14:56:04 07/31/20 (0)
- RE: Yes, I use a miniDSP to send (80Hz to subs and .80Hz to Maggies ... - Roger Gustavsson 00:45:14 07/03/20 (4)
- RE: Good question, Roger ... - andyr 01:07:38 07/03/20 (3)
- RE: Good question, Roger ... - Davey 02:26:49 07/03/20 (2)
- RE: Aah, OK, Dave ... - andyr 05:00:10 07/03/20 (1)
- RE: Aah, OK, Dave ... - Davey 08:30:53 07/03/20 (0)