In Reply to: Tympani ferrous parts posted by BDP24 on May 28, 2017 at 13:50:59:
Anyway, back to the topic. I measured the cavity behind the connector/fuse block terminal plate, and it is 5/8" deep. The short versions of the various Cardas binding posts are 3/4" long, so I'll make some 1" stand-offs to put between the plate and the MDF panel of the Tympanis, running the attachment screw for the plate through each. Either an aluminum or plastic tube, just big enough for the screw to fit into---an easy fix! The plate will then stand proud of the back of the Tympani a little, but so what?! If the speakers ever need to be shipped, the plate can just be remove, the internal wires snipped from the back of the binding posts. Magnepan is shipping the plates on Monday.
Edits: 06/02/17 06/02/17
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Tympani ferrous parts - BDP24 12:29:16 06/02/17 (6)
- RE: Tympani ferrous parts - Satie 22:19:56 06/13/17 (4)
- RE: Tympani ferrous parts - BDP24 22:35:08 06/13/17 (3)
- RE: Tympani ferrous parts - Satie 23:35:24 06/13/17 (2)
- RE: Tympani ferrous parts - BDP24 01:07:01 06/14/17 (1)
- RE: Tympani ferrous parts - Satie 12:14:42 06/14/17 (0)
- RE: Tympani ferrous parts - BDP24 19:53:53 06/13/17 (0)