Home Planar Speaker Asylum

Welcome! Need support, you got it. Or share your ideas and experiences.

RE: Should we send a "representative" to Magnepan?

I'm thinking that the woofer panels would be too far apart, we're getting to about a wavelength separation a bit above the crossover point, at about 500 Hz. So you're going to get interference between the woofers which will cause lobing error. This is a known issue with D'Apollito-type configurations:

http://www.birotechnology.com/articles/VSTWLA.html

Also, the midrange driver will be located asymmetrically wrt to the woofers. I assume you'd have everything equidistant from the listener, but I imagine that will make the lobing somewhat asymmetrical.

The question is, how audible would this be? It would really depend I think on the first and second backwave reflections more than anything else, and that would depend on placement and room geometry as well as speaker geometry and crossover slopes, plus the characteristics of the drivers themselves. So I'm not sure what it would do to the sound, I think you'd have to model it or try it to know. You might be able to tame the effect if necessary with diffusion at the reflection points.



Edits: 10/16/11

This post is made possible by the generous support of people like you and our sponsors:
  Signature Sound   [ Signature Sound Lounge ]


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.