|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
|
|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: Need help with biamping Maggie2.6R posted by jfer on April 27, 2007 at 09:15:45:
In order to actively bi-amp the 2.6R you will need to do a bit of surgery. You will need to complete by-pass the internal crossover but leave the 2 ohm resistor in series with the tweeter. The tweeter only has 1.45 ohms of impedance and without the resistor you will fry the HCA-2. You may want to keep the tweeter fuse in place until you are sure that your amp will not clip (I am using a HCA-2 on my biamped IIIa's with no fuse and no problems). Also you will need to add another set of input jacks so you have one set for the bass and one set for the tweeter.
I may be an egoist but at least I don't talk about other people.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Need help with biamping Maggie2.6R - neolith 10:03:25 04/27/07 (2)
- thanks - jfer 04:35:53 04/28/07 (0)
- Slight correction. - neolith 13:32:01 04/27/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
