Re: Also consider the woofer shunt cap.

Planar Speaker Asylum

Welcome! Need support, you got it. Or share your ideas and experiences.

Posted by ABliss (A) on April 21, 2007 at 09:30:17

In Reply to: Re: Also consider the woofer shunt cap. posted by 40for60 on April 20, 2007 at 19:41:34:

Reverse one mid/bass first, see how that sounds, then reverse the other mid/bass to match the first one. See how that sounds.
See, its not just the polarity betweem the mid/bass drivers that have to be right, polarity between the tweeters and the mid/bass driver has to be right too.

When I did mine I was very carefull to keep everything as straight as it was. However I guess because I went from the new crossover design back to the older one, when I first powered them up everything sounded confused. So I had to make the polarity changes.

AB.

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Requesting MMG crossover advice - 40for60 17:14:32 04/20/07 (14)

Re: Requesting MMG crossover advice - Rod H. 20:58:39 04/20/07 (0)

Re: Requesting MMG crossover advice - ABliss 18:24:18 04/20/07 (3)

Also consider the woofer shunt cap. - RickeyM 18:36:33 04/20/07 (2)

Re: Also consider the woofer shunt cap. - 40for60 19:41:34 04/20/07 (1)

Re: Also consider the woofer shunt cap. - ABliss 09:30:17 04/21/07 (0)

Re: Requesting MMG crossover advice - Dawnrazor 17:46:25 04/20/07 (8)

Re: Requesting MMG crossover advice - 40for60 19:31:44 04/20/07 (1)

Re: Requesting MMG crossover advice - Dawnrazor 00:41:50 04/21/07 (0)

Re: Requesting MMG crossover advice - RickeyM 18:18:41 04/20/07 (5)

Re: heavier gauge applies to longer distance - wazoo 20:42:09 04/20/07 (4)

Re: heavier gauge applies to longer distance - Dawnrazor 11:19:18 04/21/07 (3)

Re: my speaker wire - wazoo 12:20:48 04/21/07 (2)

Re: my speaker wire - Dawnrazor 21:46:11 04/21/07 (1)

Re: It can't; it's Litz! - wazoo 07:27:43 04/22/07 (0)

Follow Ups

Re: Also consider the woofer shunt cap. - ABliss 09:30:17 04/21/07 (0)

Post a Message!