|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
|
|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: Re: SVS sub posted by wgtp on April 8, 2007 at 10:46:27:
Since I am sending full signal from my stereo pre-amp outputs, I'm using the crossover on the sub.For the 1.4s, I found a dial setting of 45 hz sounded about right. For the MMGs, I have it set at 70 hz. Once I install the MaggieMate high pass filters I will no doubt have to re-adjust. I use a Radio Shack db meter and the Sheffield/Autosound 2000 Test Disc (pink noise tracks 47 through 50) to fine tune crossover and amp sensitivity settings, with the goal of achieving as flat bass response as possible. I then make the final tweaks by ear to my liking.
I'm using the stock 20 hz tune on the sub, though I plan on experimenting with the 16 hz tune (one port plug and subsonic filter set at 16 hz).
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: SVS sub - MaggieDriver 11:28:45 04/08/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
