|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
|
|
Planar Speaker Asylum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: Re: Wiring to internal drivers posted by ABliss on March 12, 2007 at 20:14:04:
That is precisely what I did and it is the ONLY thing I would recommend. You're asking for trouble if you try to connect directly to the panel strips - heed “PG's†warning! You DON'T want to try it. Do as “ABliss†instructed and you will have eliminated the cheesy part of that connector block – there is nothing wrong with that screw-down connection point. Actually the spades are okay in theory, but in my MMGs most of the wires pulled right out of their spades with rather little tugging (not what I’d consider a positive electrical connection).
"Jazz is not dead - it just smells funny" FZ♬
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Amen, brother! - wazoo 03:56:45 03/13/07 (4)
- Re: Amen, brother! - Dawnrazor 08:19:24 03/13/07 (3)
- Re: Mine are the 2nd gen, - wazoo 19:49:07 03/13/07 (2)
- Re: Mine are the 2nd gen, - Dawnrazor 22:23:55 03/13/07 (1)
- Re: short answer: yes - wazoo 04:37:26 03/14/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
