How tricky is it to wire to the internal driver and bypass the internal Magnepan terminal block? Is it best to loosen the wire with a hair dryer, then solder new wire from the driver foil onto a set of real termination blocks? Or simply run a longer wire straight to the crossover box from the driver, thereby removing a connection?
This post is made possible by the generous support of people like you and our sponsors:
Topic - Wiring to internal drivers - gladstone 17:47:47 03/12/07 (25)
- Re: Wiring to internal drivers - ABliss 20:14:04 03/12/07 (20)
- DO NOT SOLDER - JFShark 08:16:29 03/14/07 (3)
- WHY, are you repeating exactly what I posted... - ABliss 19:59:50 03/14/07 (2)
- Re: WHY, are you repeating exactly what I posted... - JFShark 11:25:59 03/15/07 (0)
- Re: WHY, are you repeating exactly what I posted... - wazoo 10:46:25 03/15/07 (0)
- Re: Wiring to internal drivers - newtonnjd 11:13:02 03/13/07 (1)
- Re: Wiring to internal drivers - ABliss 12:27:25 03/13/07 (0)
- Re: Amen, brother! - wazoo 03:56:45 03/13/07 (4)
- Re: Amen, brother! - Dawnrazor 08:19:24 03/13/07 (3)
- Re: Mine are the 2nd gen, - wazoo 19:49:07 03/13/07 (2)
- Re: Mine are the 2nd gen, - Dawnrazor 22:23:55 03/13/07 (1)
- Re: short answer: yes - wazoo 04:37:26 03/14/07 (0)
- Re: Wiring to internal drivers - Dawnrazor 20:21:46 03/12/07 (8)
- Re: Wiring to internal drivers - gladstone 12:33:48 03/14/07 (7)
- Re: Wiring to internal drivers - wazoo 18:02:26 03/14/07 (5)
- Re: Wiring to internal drivers - gladstone 05:30:39 03/15/07 (1)
- Re: Yes. - wazoo 10:35:49 03/15/07 (0)
- Re: Wiring to internal drivers - gladstone 05:29:46 03/15/07 (2)
- Re: Makeshift solder pot - wazoo 10:35:04 03/15/07 (1)
- Re: Makeshift solder pot - gladstone 11:56:20 03/15/07 (0)
- Re: Wiring to internal drivers - ngchaisoon 17:32:01 03/14/07 (0)
- Walk Away Pilgrim - Peter Gunn 19:34:55 03/12/07 (0)
- Re: Wiring to internal drivers - Dawnrazor 19:00:41 03/12/07 (2)
- Re: Wiring to internal drivers - gladstone 05:50:44 03/13/07 (1)
- Re: Wiring to internal drivers - Dawnrazor 08:14:25 03/13/07 (0)