High Efficiency Speaker Asylum

Need speakers that can rock with just one watt? You found da place.

Return to High Efficiency Speaker Asylum

Message Sort: Post Order or Asylum Reverse Threaded

Just pulled the trigger on some 2420's, 2307's and Kenrick Sound 2308's!

68.7.9.132
Posted on June 17, 2020 at 19:42:16
Cougar
Audiophile

Posts: 4589
Location: SoCal
Joined: June 25, 2001
 I already have the 2245H's and 2123H's, so these are the next step in completing my parts gathering for my JBL 4345II project.

The 2420's and 2307's are in excellent condition and you know the Kenrick 2308 lenses are excellent as well.

My 2245H's are going in to be reconed this Friday. Can't wait to get them back. This will give me more time for the construction of these massive cabs. I hope I don't end up regretting this project since its very expensive and time consuming.

I did have a pair of Pioneer HPM900 series speakers which sound really nice in my system. I was told by a person that had 900's and 4345II's that the 4345 sound way better!

 

Hide full thread outline!
    ...
Kenrick Sound 2308's lenses came in., posted on July 7, 2020 at 20:48:16
Cougar
Audiophile

Posts: 4589
Location: SoCal
Joined: June 25, 2001







Here are some pics.

 

Update 4 My JBL 2405H super tweeters came in., posted on July 7, 2020 at 20:41:46
Cougar
Audiophile

Posts: 4589
Location: SoCal
Joined: June 25, 2001







They are in good shape. I need to get replacement labels.

 

Update 2., posted on June 28, 2020 at 16:52:47
Cougar
Audiophile

Posts: 4589
Location: SoCal
Joined: June 25, 2001













Today I went to check out my 2420 diaphragms and got a surprise. Bad and good news. When opened them up this it what I found! The bad was one diaphragm is damaged and not the same as the other. The damaged one is an after market diaphragm. The other looks original and in good condition.

The Good news is I had already purchased the Radian replacements 16 ohms. So I will just replace them both.

The foam on one is cracking and falls apart when touched, the other is in better condition.



 

Meant Update 3. Nt , posted on June 28, 2020 at 16:57:41
Cougar
Audiophile

Posts: 4589
Location: SoCal
Joined: June 25, 2001
 Nt

 

Update 2: my 2420's with 2307's came., posted on June 23, 2020 at 12:45:23
Cougar
Audiophile

Posts: 4589
Location: SoCal
Joined: June 25, 2001











Here are some pics.

 

RE: Update 2: my 2420's with 2307's came., posted on June 23, 2020 at 13:03:06
rivervalley817
 I would buy me a beer and just stare at those for a half hour

regards,


 

Update: I picked up some...., posted on June 21, 2020 at 19:20:31
Cougar
Audiophile

Posts: 4589
Location: SoCal
Joined: June 25, 2001
 JBL Foilcal for the 4345's and some JBL speaker mounting kit hardware. I also ordered some JBL 2405's, this will complete my speaker list of 2245H's, 2123H's which will be made into 2122H's, 2420's, 2307's and 2308 lenses, 2405's super tweeters.

Now I have to finish gathering the Baltic Birch wood which I have half of it already. Then need to decide if I want to make an external Xover (Kenrick style) or internal Xover.

Now the hard part/s begin! :)

 

RE: Update: I picked up some...., posted on June 21, 2020 at 21:26:01
rivervalley817
 that's a mighty fine project

I heard those long ago on Mac SS, Revox front end

they were impressive & I guess 'immersive' ... in a 'nice' room

forgive me for not following the thread but what will you drive them with?

regards,

 

I will be running the 4345's with..., posted on June 21, 2020 at 21:54:00
Cougar
Audiophile

Posts: 4589
Location: SoCal
Joined: June 25, 2001
 Two Crown power amps, XLS 2502 and XLS 1502 in Bi amp mode. I have seen that this will give better sonic performance due the voltage driving of the lower end drivers. I will also do the Charged Coupled crossovers like JBL did.

I do have two other amps for the upper end if the Crown don't do it. I have an Edge M8 amp and my VTA-120 tube amp.

I'm still undecided if I want to do a internal or the external crossover like Kenrick does. Most likely will do the external crossovers.

I know when you do a the Charge Coupled xover you don't really need to use expensive high quality capacitors. I will still probably use the Jantzen Superior Z caps on the upper end part of the Xovers. These are some really nice caps for not too much.

 

RE: I will be running the 4345's with..., posted on June 23, 2020 at 09:35:37
rivervalley817
 I agree on the caps, and I would surely want tubes 'up top' if they mesh well with the system ... I'm actually excited about this project for you, it should be hella cool!

regards,



 

RE: Just pulled the trigger on some 2420's, 2307's and Kenrick Sound 2308's!, posted on June 21, 2020 at 12:12:36
KanedaK
Audiophile

Posts: 2519
Location: Brussels
Joined: April 27, 2010
 I'm definitely looking forward to seeing the completion of your project! I LOVE big JBLs!
Hope you're going to post some pictures as you build the cabs :-)

 

RE: Just pulled the trigger on some 2420's, 2307's and Kenrick Sound 2308's!, posted on June 21, 2020 at 19:13:47
Cougar
Audiophile

Posts: 4589
Location: SoCal
Joined: June 25, 2001
 I will post some pics.

 

Also grabbed some after market JBL Foilcal for the 4345's., posted on June 18, 2020 at 14:38:53
Cougar
Audiophile

Posts: 4589
Location: SoCal
Joined: June 25, 2001
 I thought I would jump on these since I will need them down the road. Now all I need is the JBL Super tweeter for the 4345's and I'm done with my parts.

 

Page processed in 0.023 seconds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]