|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
69.228.195.226
In Reply to: RE: Pictures posted by B.K. on January 18, 2010 at 16:11:39
Are you saying that, based on the SA-750D drawing above, if you were to move the cartridge 3mm further forward than your picture, you would have a stylus tip to tonearm pivot distance of exactly the 229mm as shown on the drawing above?
That's assuming a mounting position with a spindle to pivot distance of 214mm, of course.
Follow Ups:
Basically, that was what I was trying to show.The stylus is about 7.5mm from the front of the headshell, so if the Shure V15VxMR was mounted on a Jelko SA750D it would produce an effective length in the order of 4mm less than the nominal effective lenght (229mm). The nominal effective length occurs when the stylus is about 3mm from the front of the headshell - see Jelco drawings.
The minimum possible effective would variy for each cartridge because the distance from the stylus tip to the mounting bolts is not a constant - for example a Denon DL103 at the same position in the headshell would produce an effective length about 6mm short of 229mm. That's why most tonearms have slots in the headshell.
However, I disagree with your last point: the mounting distance does not change the effective length. It just changes the null radii.
BK
Edits: 01/19/10
You're clearly saying that if I take that cartridge mounted exactly as you have it and put it on the 750D I would have an effective length of 225mm. Here's your quote:
"so if the Shure V15VxMR was mounted on a Jelko SA750D it would produce an effective length in the order of 4mm less than the nominal effective lenght (229mm)."
So, please explain how my 20XL is mounted AND MEASURED with an effective length of 232mm (see the picture...) and the stylus is within a mm or two of your Shure.
"I'll play it and tell you what it is later..." - Miles Davis
Vynyltap's System
Spot the difference:
"You're clearly saying that if I take that cartridge mounted exactly as you have it and put it on the 750D I would have an effective length of 225mm. Here's your quote:
"so if the Shure V15VxMR was mounted on a Jelko SA750D it would produce an effective length in the order of 4mm less than the nominal effective lenght (229mm).""
nt
"I'll play it and tell you what it is later..." - Miles Davis
Vynyltap's System
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: