Audio Asylum Thread Printer
Get a view of an entire thread on one page
|For Sale Ads|
In Reply to: RE: When you're dealing with a degree at a time posted by M3 lover on April 15, 2017 at 10:51:00
I confess to eyballing 92 degrees based on looking at that angle printed on a piece of paper and counting on the memory. When I started, the diamond looked to be at 90. Using the ET, it was easy to raise the arm a few mm and see the effect. I may be at 91 or 93, but given varying thicknesses of LP's, that's OK.
For a 9"/230mm tonearm to get the SRA from 90 degrees to 92 requires an 8mm rise at the pillar.
For a 12 inch it's close to half an inch!
Pillar to stylus distance on an ET II is just a little over 8". It's also one of the few arms where you can adjust VTA/SRA without changing overhang. My guess is my adjustment was around 5mm.
Post a Message!
This post is made possible by the generous support of people like you and our sponsors: