|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
68.8.152.22
I was playing some Lenny White "Twennynine" LP's and my ET-2 arm started to skip at a certain point on the LP. Then I remembered, That I had forgot to do my 6 month maintenance. Just a little Isopropyl Alcohol on a cotton swab and wiped the spindle and cleaning thoroughly with the cotton swab. Moved the spindle back and forth in the manifold with air on of course. All is good now.The reason for posting this is to help others with ET-2 or with other air bearing arms. The pressure was good, so no issue there. Also to let others know that might be scared away from these arms that there is very little to go wrong other than with proper cleaning and air pressure. You do have to make sure the table is perfectly balanced along with the arm/manifold to insure proper function of the ET-2 or other air bearing arms.
These are not as bad as a lot have mentioned. Way better than going crazy over antiskate issues. I don't miss that at all!
Edits: 12/22/16 12/22/16Follow Ups:
Thanks for the tip cougar much appreciated.
Enjoy the holidays and the music
Kindablue
That what this is all about! Merry Christmas!
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: