|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
78.14.157.39
In Reply to: RE: mx110 new volume control posted by Michael Samra on January 03, 2017 at 16:29:42
Ok ,i have set on 2000mv red on adc black on the gorund:no dc current
flow on the 6 pins of volume control.
I noticed that when i turn the pot clockwise one of the pins is
moving slightly front to back ;if i put a very little bit of
deoxit (Philips dry contact cleaner )is gettin better ,but is
not solving the issue .
Do ineed a freh pot?
The unit was checked several times during years by very
knowedgeable technician.
Follow Ups:
I don't want DC current,I want to know if there is DC voltage of more than 1vdc or more.If there isn't,it's time for a new pot.As far as one of the pins moving when you turn it,that is no big deal.Which model MX-110 do you have? Is it a MX-110z?
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
Sorry i meant voltage ;no dc voltage ;yes it is a z mx110(compactron
6d10)serial n 539z4
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: