Tweaker's Asylum

• Repair the SS? Dan G. 14:24:55 05/17/01 (4)
  In Reply to: Vifa D25AG or PL27TG? posted by XL on May 17, 2001 at 13:27:50:

  I recently lost a Revelator 9900. What prompted the damage?
  Based on my descritpion, the problem I have could be a $20 fix for SS USA.
  you might want to check that out before replacing them.

  Michael BArnes of norh usees those drivers in his speakers, perhaps you could e-mail him for a tweeter rec.

  dg
  
  

  ---

  • Re: Repair the SS? XL 07:48:53 05/18/01 (3)
    In Reply to: Repair the SS? posted by Dan G. on May 17, 2001 at 14:24:55:

    Hi.

    A soldering had come loose in the network. Do you know how to fix it? I would be very glad!
    
    

    ---

    • Re: Repair the SS? PeterS 11:50:01 05/18/01 (1)
      In Reply to: Re: Repair the SS? posted by XL on May 18, 2001 at 07:48:53:

      XL,

      You say there's loose solder connection in the network of your speaker and the SS tweeter's no working.

      I'm assuming you mean the loose solder connection is in the crossover network. If so, this is a simple fix. All you need is a soldering iron and some solder flux and solder. You or a friend w/ an iron can fix it in a few seconds. Post back to clarify just where the loose solder connection is located.

      PS
      
      

      ---

      • Re: Repair the SS? XL 11:30:25 05/20/01 (0)
        In Reply to: Re: Repair the SS? posted by PeterS on May 18, 2001 at 11:50:01:

        Hehe, my bad english caused some misunderstanding here!

        Yes, the loose solder connection is in the crossover network, or was actually, i've fixed but. The problem is that the crossover network broke the tweeter when it wasn't working properly.

        Do you know how I can fix the SS?
        
        

        ---
    • Not me specifically Dan G. 10:09:46 05/18/01 (0)
      In Reply to: Re: Repair the SS? posted by XL on May 18, 2001 at 07:48:53:

      But if you post here or at MAdisound boars maybe someone can help.
      Alos, if you drivers are less than 1 year old they are still probably under Scan S0peak warranty.
      Try to contact Vifa/SS in your region and they should arrange for the repair, or be able to instruct you.

      Don't give up on those $250 tweeters yet!

      dg
      
      

      ---
• Re: Vifa D25AG or PL27TG? XL 14:17:03 05/17/01 (0)
  In Reply to: Vifa D25AG or PL27TG? posted by XL on May 17, 2001 at 13:27:50:

  I forgot to say that I listen to a lot of metal but I also likes a lot of other genres.
  
  

  ---

This post is made possible by the generous support of people like you and our sponsors:

VH Audio

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2025, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---