|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
76.115.149.156
In Reply to: RE: More fun with magnets! posted by Ric on April 25, 2021 at 07:15:17
I have done a lot of tweaking with magnets over the years. I need to give credit to Rick Schultz for the initial idea. I met him at the Show next to the high end show at CES. It was his first show there with his original company out of Canada.
I had a batch of custom made neodymium barrel shaped magnets with a hole running down the center big enough for a 12 gauge wire. I had them plated with silver rather than nickel.
Follow Ups:
Regarding the hole in the center. My experience is that the magnets need to be IN the signal path to be most effective. If you are running them THROUGH the center without the wire connected to the magnet, I'm not sure you would get much affect. Also, the magnets need to be pointing the same direction (negatives same side) and if the sound is diffuse, turn them around. Anyway, that's my experience!
I started that way. I found it best for AC cords, Not small signal applications. YMMV.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: