|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
24.76.171.131
In Reply to: RE: Baffled by a switch mode power supply problem. posted by mg16 on March 29, 2021 at 10:28:12
nt
"I know just enough to get into trouble. But not enough to get out of it."
Follow Ups:
No, I made sure . I used the same connector, and it is marked on the wall wart as center pin negative, outer contact positive. Wired it that way and double checked with my meter.
... and it's a linear power supply you need to use with the Stax unit?
I came across an article where someone is using a car battery for the 12v DC. They mention the adapter included with the Stax unit is "non" SMPS.
Cheers!
Jonesy
"I know just enough to get into trouble. But not enough to get out of it."
Is it possible to feed the circuit with the voltage regulator disabled, so it approximates the output of the wall wart, but still a better sounding option than using the stock wall wart, mg16?
I guess I will try to see how it sounds unregulated.
Thanks,
MG16
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: