|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
68.109.136.158
In Reply to: RE: Carbon Fiber Wall Outlet Covers - Reprise posted by pictureguy on September 29, 2020 at 00:16:06
..and I've been looking for brass screws for my wall plates.....not at Home Depot or Lowes
Follow Ups:
Sgreen, both can be hard to impossible to find at regular hardward stores. It can get pricey since we only need one or a few. I could probably send you a 6/32 brass screw and I should be getting a few titanium 6/32 screws in soon. These are US threads. If your threads are metric than you are on your own. Looks like anything can be gotten on ebay but there's the quantity and shipping cost. If you have a fastener specialty business around you that might work. Look into that and maybe they will give you one or sell a small quantity. #1 is to make sure you know the screw size.
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." Alfred E. Neuman
I'll take you up on your offer only if I can send you a check. I'll look into the screw thread and length size....will let you know. Thanks again.
Around here? I"d go to ACE Hardware. They frequentyly have stuff the 'big boys' don't........
They even have Rockwood lump charcoal for my BBQ....
Here in SoCal? Even finding an electronics store to source a few parts was a PIA. ANYTHING out of the mainstream is either send for it or drive a ways.
I wanted some plastic lenses for kitchen lights. Home stores are ALL small.....Instead of 24"x48" subtract 1/4" from both dimensions. WHAT? I had to drive 35 or 40 miles to find full dimension lenses......
Crazy.
For the screws? I'd check McMaster Carr......they have EVERYTHING......
Too much is never enough
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: