|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
155.229.163.122
In Reply to: RE: Gatorboard / Gatorfoam Revisited posted by Duster on February 27, 2017 at 13:28:52
Thanks, Duster! I think I get it: even one additional squishy layer is likely not to play well with my turntable's suspension; instead, you recommend that the suspension be the only compliant "layer" -- with everything else being rigid.
Would Herbie's "Hi-End Booster Bases," used in conjunction with the Grungebuster Dots (which I think you originally recommended), be an improvement over the Tenderfeet?
To your immediate suggestion, metal cones or spikes are certainly doable -- although that's not something I use and have around. If I were to start with what I have on hand, I could try either the old Polycrystal cones (lots of those around) or a set of Finite Elemente Ceraballs, which I'm thinking might conform to your suggestion:
Despite the employment of ball bearings, here, these devices don't shift horizontally like most bearings do. They're quite stationary. And as a result, I believe that they act very much like cones or spikes, with their functionality being almost entirely in the vertical coupling realm:
The CERA technology is based on direct coupling for effective transfer of sound interfering resonance. Fast resonance transfer is provided by extreme hard high-tech ceramic balls. Combined with precision machined materials like stainless steel or aluminum the optimum balance between damping and deflection is achieved. The resulting vacuum effect draws off unwanted resonance directly where it evolves.
Hmmm ... yea or nay? Could these be used alone, or should they be matched up -- top or bottom or both -- with the carbon fiber discs?
You know, it strikes me that, by adding this extra platform, I really don't stand to gain anything beneficial, and I've probably laid some traps for myself. Would shifting gears and looking for a way to raise the turntable, on its own, high enough to clear the top-shelf obstructions -- while directly coupling it to that same top shelf -- be the preferred approach?
This has gotten a bit too thorny for my limited insight/knowledge. Please know how much I appreciate the expertise!
Follow Ups:
You should be good to go, since either the Polycrystal cone or the ceraball Universal footer should perform well for the purpose. I would adhere a 40mm x 10mm Carbon fiber disc under either device with Liquid Nails silicone adhesive, with a 40mm Herbie's Audio Lab Thin grungebuster Dot (black version, with optional adhesive backing) affixed to the bottom of the disc as an interface with the rack shelf surface. The slightly rounded tip of the Polycrystal cone would be placed tip-side-up to make contact with the bottom of the turntable platform, with the carbon fiber disc acting as a base. The top of the ceraball Universal footer should also have an appropriately sized Herbie's Audio Lab Thin grungebuster Dot (black version, with optional adhesive backing) affixed to it to act as an interface with the bottom of the turntable platform, with the carbon fiber disc acting as a base. If I were to choose one vs. the other without comparing them, I would choose the ceraball Universal footer since the coupling function and potential beneficial vibration control may be better optimized for the purpose.
I'll experiment with both devices -- and, in addition, try them in configurations of three and four.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: