|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
32.212.120.78
In Reply to: RE: soldering technique question posted by Awe-d-o-file on September 07, 2016 at 15:32:46
I mentioned, in my post, that I have a Metcal. It's model ps-900. No readout but works great.
Follow Ups:
Sorry, I missed that. I would want to be around 800 degrees to quickly solder without heating the insulation which in my experience happens with too low a temp over too much time.
ET
"If at first you don't succeed, keep on sucking till you do suck seed" - Curly Howard 1936
Sorry, I missed that. I would want to be around 800 degrees to quickly solder without heating the insulation which in my experience happens with too low a temp over too much time.
ET
"If at first you don't succeed, keep on sucking till you do suck seed" - Curly Howard 1936
Thanks for the reply. I agree about the "to low heat". My problem was happening with an old Velleman and it took along time for things to get hot enough.
I've soldered wires to small lugs with the Metcal and it only takes a few seconds. I will be trying the Metcal on the massive Cardas posts soon.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: