![]() ![]() |
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
69.113.169.240
In Reply to: Benefits of a *Single* Dedicated AC Line? posted by Jim Hodgson on March 15, 2006 at 17:15:44:
My preference when installing 'dedicated' lines for audio/video systems is to run one single 12/3 BX cable line(BX cable is used in NYC), and use each leg to provide separate(meaning 2)sets of outlets for the customer use. Running multiple lines should not be a problem once all the connections(grounds) are secure and tight to panel and outlet boxes, but my preference is for a single neutral. I think if one needs 4 or more dedicated lines, it makes more sense to do a sub panel with a single large guage(think 8/2 or bigger) run to the main panel, and then do whatever amount of individual line in the room itself. Less chance for noise intrusion IMO.
THere may not be one accepted practice in your sceranio, and the code does not address audiophile concerns.
![]()
Follow Ups:
Joe,
If you're feeding two sets of outlets with a single neutral, this would mean that your hots are being fed from opposite 120V legs right ? Common-neutral circuits are no good for audio because you will have components in the same system operating from two different legs. The advice here at AA has always been to have all dedicated circuits on the same leg.
![]()
This post is made possible by the generous support of people like you and our sponsors: