 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
I have pair monoblocks VTL MB-100 and I lost manual.I have one question:
In switch triode/tetrode: position down is triode ou tetrode ?
thanks
mmartins
Follow Ups:
here's how to find out for yourself to a 95% confidence. Uncover the bottom and discharge the power supply capacitors and any other energy storage devices to render the bits and pieces safe. With an ohm meter between pins 3 (the plate) and 4 ( the screen) measure resistance between them as you flip the switch back and forth. The lower reading should be for triode position as the plate and screen are connected together, possibly with resistor( but it will be smaller than any dropping resistance in the power suply, I suspect). Consult the schematic if you get two identicle readings, though I doubt it will happen.
regards,
Douglas
If I have made some error, somebody will point it out I'm sure...no danger to do as I have suggested.
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
