|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
104.129.198.81
In Reply to: RE: Question about tube clearance in shelves posted by audiobasic2000 on January 19, 2017 at 08:57:35
I already moved the shelves to be able to fit three components, with the most room being over the amp. The amp is on the bottom because it's almost 33 lbs. The clearance at the top is what I am more concerned with if I add the tube phono stage, or maybe even a tube pre down the road.
Follow Ups:
One last suggestion, Nuwave, but I don't know if you're willing to try.
1. Disconnect the Meridian Pre, move the Marantz to the top shelf, removed the middle shelf, and place the Meridian vertical-wise either to the left or to the right of the amp, and reconnect everything. I know it's not the most aesthetically pleasing sight but at least that will provide ample ventilation above the amp and warm/hot air rises and still allow the Meridian Pre to breath. (Plus you can use shorter interconnects between the Meridian and the Audio Research amp.)
Sincerely,
Kingsley.
12AX7s produce very little heat. Top shelf is fine for that phono amp.
I strongly agree with Sony6060's statement that 12AX7s do not dissipate enough heat to worry about. This the case with many other typical pre-amp tubes as well barring the big boys some use.
That said, if you decide to use a big tube pre-amp it could get toasty in there. My answer is ditch the rack! At that point, you have become a real tubophile, and need to treat your tubes with care. An audio rack typically has open sides, front and back. Good luck don't stress over the phono stage.
The amp well that's another story.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: