|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
76.90.36.216
In Reply to: RE: Photos posted by Triode_Kingdom on April 08, 2021 at 11:08:48
It was just a hole punch from a Greenlee set. I could go look and try to figure out which one I used.It must have been 1 1/8" that worked for me. I don't remember doing any reaming.
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
Edits: 04/09/21Follow Ups:
1-1/8" won't clear the socket wall. I was thinking the smallest standard US punch size that would clear is 1-3/16. Doesn't leave much for the socket to hang onto though, and of course, there's no keyway. Thanks for offering, but don't go to the trouble of looking for this. I'll make a test cut at about 1.165" with a keyway to see if it works OK. That's the only way I'll know for sure.
--------------------------
Buy Chinese. Bury freedom.
I have one of the Greenlee punches with the keyway - I assume it's 1.172" per Amphenol, but can't measure it right now, being 600 miles from my basement... I'll be home next week.
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: