|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
70.59.9.123
In Reply to: RE: Schematic shows posted by FenderLover on June 14, 2017 at 07:37:25
I want to get that higher. Still tweaking.
PS: 395-0-395 > 5V4 rect > 20uf 500V film > 5H choke > B+ 403VDC > 50Uf > 900ohm 5W > 50uf > 4Kohm > 334V screen, etc etc
Follow Ups:
Maybe try a 5U4GB rectifier, if PT can handle extra current needs? A bit more B+. Readjust bias to desired output.
Edits: 06/14/17
Thanks for advice. I have both 5U4 and 5V4, and 5V4 gives slightly higher B+. I have GZ34 to try as well.Now at 405v plates, 1.20V at cathode, -32V at grid. Pretty close.
Adjusting bias, I can get the B+ to go up, but cathode voltage drops to around 1V.Rough calculation of current: 1.21v / 26ohm (each side of 52ohm balance pot) = 46.5mA ?
Anyway, not worried about it much.
Edits: 06/14/17
Odd, the 5U4G should make a bit more voltage than the 5V4G. At the cost of drawing 3-amps from the PT (versus 5V4's 2-amps).
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: