|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
76.90.39.24
In Reply to: RE: Here is the schematic for one channel ..... posted by vinnie2 on June 04, 2017 at 14:02:33
Very few gapped SE transformers will go flat to 20Hz because it's hard to get the necessary inductance without introducing a lot of capacitance that causes losses of the high frequencies.
Having said that, the "big buck" transformers get very close to 20Hz and extend well beyond 20kHz.
There are a lot of things that factor into what a system ultimately sounds like but I have always believed that the best output transformers, together with circuits that are built as broad band and distortion free as possible results in really good sound.
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
Follow Ups:
Can't argue with that, but it leaves one thing out. How close to perfect do you want to get, and how much are willing to spend to get there?
I suppose for some people money is no object, but for the rest of us there will always be trade offs. Each of us has to determine for themselves what those will be.
It's not a philosophical issue. The Hammond transformers you're using fall short of hi-fi performance. Reasonable cost alternatives are available from Hammond, Edcor and Triode Electronics. Used transformers by HK, Scott and Fisher also show up occasionally on eBay. Full range OPTs will make a significant contribution to the sound of your amps.
--------------------------
Buy Chinese. Bury freedom.
It is a philosophical issue in that we all have our own opinion of what "reasonable" is and what sounds good to us and how much we want to spend.
There is no such thing as perfection with audio electronics.
Even with the best parts it's always a series of compromises, as is life.
Tre'
Have Fun and Enjoy the Music
"Still Working the Problem"
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: