 
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
|
|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
216.196.210.70
In Reply to: Ping Gordon R – a pre for dynamics & detail - a 45? posted by rick57@optusnet.com.au on May 30, 2006 at 07:14:19:
Richard,With the ASC's you are going to need like a dual choke input as the noise will be very high. Maybe go with like a 5h/75ma hammond or something and use another ASC after that into the circuit.
Since I have no experience at all with any of the DIY circuits it maybe better to ask the rest of the group.
I also disagree heavily on your BI amping!!!!! You have to have the same amplifier if you xover anywhere in the 100-10k range or the differential sound of the amplifier will destroy the sound of your system.
Thanks
Gordon
J. Gordon Rankin
Follow Ups:
Gordon,I have heard reference to that “risk” of biamping, maybe not that strongly.
If it doesn’t sound right I’ll use the Bugle in another system and have to find new drivers for > 600 Hz (which should be an easier task).> With the ASC's . . . the noise will be very high.
Thanks for the warning!
I could altenativly use (correct value) Panasonic TSHAs that I have – which do you think would sound better, vs ASC's implemented as you outline?Thanks
Richard
This post is made possible by the generous support of people like you and our sponsors:
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
