![]() ![]() |
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
In Reply to: Re: Perspective, how about this: posted by john curl on December 08, 2003 at 12:12:08:
As you have observed, a wider bandwidth will by definition have more noise and be more susceptible to interference. However; keeping the bandwidth, let's say at 30 kHz will reduce this effect. Given that you are finding "crossover distortion" at 5 kHz in your test set and Bruno is not at 1 kHz says more about test equipment and test environment.
As we also have observed the noise floor in Bruno's test set appears to be about 20 db lower than yours if I remember correctly.
In conclusion I will ask you once again to check your test set up and especially the Oscillator in your source equipment. Given your previous statements on earth grounding I will ask the question; Is your HP Analyzer and your Source equipment properly grounded?
![]()
Follow Ups:
Just to clarify things: I use 5 KHz, because my test equipment null is more stable at 5KHz than 1KHz this year. The tests that you are relating to were done YEARS AGO. I now use 5 KHz, as I did when first measuring with my linear spectrum analyzer starting about 10 years ago. I only changed, temporarily, to fit in the 20KHz window of the MAC FFT program. I prefer 5KHz when measuring other things, such as power amps, because it puts more stress on the unit under test.
![]()
You have not addressed the other part of my question on grounding. My other question is why is 5 kHz more stressful on wire as opposed to 1 kHz?
![]()
It is more stressful on amps and preamps which is what I make for a living. That is why I first improved my equipment in order to make tests like these. Wire is an afterthought.
![]()
You still haven't answered my question on grounding.
![]()
This post is made possible by the generous support of people like you and our sponsors: