|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
178.219.42.74
In Reply to: RE: Any problem if the driver for the Processor is lost? posted by jackwong96 on December 09, 2011 at 08:42:10
.
Serge.
http://cmp2-mihaylov.narod.ru/
My cMP2: Windows XP SP2 Ru, Gigabyte GA-H55M-UD2H, Intel Core i3-530, Corsair CM3X160C9DHX 1GB, system drive - Transcend IDE FLASH MODULE TS2GDOM40V-S, ESI Juli@, full linear PSU, NAS - WD My Book Liv
Follow Ups:
The driver was "intelppm.sys" removed during Steppe 11 Batch. I searched the Registry on another computer and found some entries relating to this file. The CMP machine is not with me now, will look at it tomorrow and take screenshots.
I recall some other devices with exclamation mark:
Firmware Hub
Microcode Update Device
System Management BIOS Driver
Numeric Data Processor
Programmable interrupt controller
Our goal is to delete unnecessary files that are not going to be used by CPLAY/CMP, or where their removal will improve SQ. The hub and update device etc are already disable anyway, so they will not cause any problem. But the Processor issue demands thorough investigation. I will skip "intelppm.sys" during installation tomorrow and compare the differences.
I recall some other devices with exclamation mark: Firmware Hub; Microcode Update Device; System Management BIOS Driver; Numeric Data Processor; Programmable interrupt controller
I've had all these devices disabled in DevManager on my main cMP^2 system for at least a couple of years. I've also disabled the DMA Manager and other devices with (I like to think . . . ) sonic benefits. My hunch is that the likes of DMA are handled by the chipset drivers and that the MS devices are inessential. Whatever, the box seems to work fine without them. Have I removed all the relevant drivers?
Good question.
HTH
Dave
System Management BIOS Driver,Numeric Data Processor,Programmable interrupt controller are already disable too. See "Step 1 – disable unnecessary system devices
" here http://www.cicsmemoryplayer.com/index.php?n=CMP.07Optimisations.
Serge.
http://cmp2-mihaylov.narod.ru/
My cMP2: Windows XP SP2 Ru, Gigabyte GA-H55M-UD2H, Intel Core i3-530, Corsair CM3X160C9DHX 1GB, system drive - Transcend IDE FLASH MODULE TS2GDOM40V-S, ESI Juli@, full linear PSU, NAS - WD My Book Liv
I am going to see what happens when I remove processr.sys tonight.
Should have known you were studying the registry!!!
.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: