Computer Audio Asylum

RE: Cmp2 lynx users (allocator too) with new 32mm HELP!

174.89.26.28

tsearay

A

In Reply to: RE: Cmp2 lynx users (allocator too) with new 32mm HELP! posted by Dawnrazor on March 02, 2011 at 16:20:20

I am using the OCZ agility 2 ssd. There is a hotfix for xp SP2 no need to go to SP3.

Bios is F10.

There is also a wipe utility and one or two other downloads, paragon worked well from the sata connectors.

The H55M has external sata but the TNN300 has lots of room with the 2.5 storage drive and the ssd. I am using a 5400 rpm Seagate green drive for storage.

Listening for the first time, I will get back to you on the advanced setting in mixer. All settings as per Cics/minlogon

Anita Baker/Rapture/24/192/L22/Mogami aes/analog out/C41/MC2505/SHL5/25th

T.
No worries!

Follow Ups:

RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - Dawnrazor 20:15:45 03/02/11 (3)
Thanks.

I plan to start over I think.

What drivers did you load from the pict below. I am thinking just the chipset ones are needed but what about the others??

No one here remembers the bending of our minds
- RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - tsearay 13:15:02 03/07/11 (2)
  Just rebuilt a couple of TT still like the sound of vinyl;). I had a quick look at advanced settings. Also I have no drop outs and very little, less than a few seconds of lazy mouse. I know that I only installed the drivers I thought I would need no ethernet etc. Then removed as per optimization of the XP platform. My advanced settings are as follows for the L22;
  
  Selected auto conf. recalibrate
  Analog in 1+2 HPF
  Sync Start
  LS2 sync adapt in
  memory read multiple
  Stereo
  
  Hope this helps, other than cold start from hard boot the system is very stable no drop outs etc. Currently listening to SOX not SRC but no problem in either 192 tiny.
  
  I was wondering if anyone has had any luck with a USB thumb drive? I have ghosted my OS 2.7 gig but keep getting the blue screen of death after XP start up screen. Using f12 to select thumb drive at boot up. Thomas
  No worries!
  - RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - Dawnrazor 18:35:07 03/07/11 (1)
    Thanks a bunch for the report.
    
    This whole thing is just getting stranger and stranger. I did the 4th rebuild I think and had tons of issues until I did a slipstream disk with sp2. It was some bios setting as I DIDNT have the bios settings this time and sp1 was a no go. Before I had done the settings per cics and sp1 was ok.
    
    So I get past that and am able to load the mobo drivers with no issues. Weird thing is that the PCI Simple Communications Controller that I had on other builds was now gone (cics said he didnt remember it) so I assume that the mobo chipset drivers are now correct.
    
    All happy except the latency is super high and in the 60s. Then I try to install the latest Lynx driver and the installer says it is successful but nope windows gives me error 39 in the device manager.
    
    Uninstall and install a couple of times and have the same issue. What is strange is that the Lynx has always been pretty good at installing and working.
    
    I thought I had tracked the main issue down. In the mobo manual it says that if you are installing only ONE stick of memory to put it in slot 1 or 3. But the slots are reversed and slot one is really the 2nd slot from the processor. I thought that might be the issue but since I cant get the lynx driver to install I cant tell. Also I seem to not be alone with not being able to get 192 to work without pops and clicks.
    
    The lynx driver was version K, so I can try an older one and see if that works. I think changes past c were only for the aes 16 or aurora anyhow so maybe it is not a big deal.
    
    Thanks again for the help.
    
    Sorry I cant help you with the usb thumbdrive. I forgot mine was connected and when I was installing xp I saw the space that magically appeared and formatted it losing all the data on it. LOL.
    
    No one here remembers the bending of our minds
    - RE: Cmp2 lynx users (allocator too) with new 32mm HELP! - Dawnrazor 08:52:01 03/09/11 (0)
      Still have the same mouse and mixer issue with the sound getting slow as I move the mouse around.
      
      This is with ZERO of the os optimizations applied so maybe things will get better?
      
      I DID get the latest lynx driver to work. I just loaded in version c and THEN did version N and it worked.
      
      The good news I think is that the old cmp2 box which is now a general computer with w7 is doing similar things when I try 192k. so perhaps with the optimizations it will work.
      
      No one here remembers the bending of our minds

Post a Followup:

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.

This post is made possible by the generous support of people like you and our sponsors:

Amplified Parts