|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
77.184.20.251
In Reply to: RE: Lynx AES16 Or AES16e? posted by smicyta on December 19, 2010 at 02:04:36
hey smicyta,
have been looking forward to any relevant response to your question, but it seems it´s one of those tricky ones that hardly can be answered.
who would have compared them 1:1 ?
I´m sure that lynx support can answer why both of these cards are in their portfolio.
the PCIexpress bus is definitely the faster connection compared to the regular PCI, so in a multiple channel mixing scenario it should allow less latency, jitter and distortion....and a better signal-to-noise ratio.
I doubt it will have any relevance in a domestic stereo or 4 channel mode.
the lynx soundcards are all blessed by superior driver maintenance and continuous upgrades from the manufacturer, and that, I believe is the main reason for their success among professional studios.
it is my observation that the ongoing development of drivers is a vital key to staying on top of the game in digital audio, and
find it remarkable that some of lynx products, despite their age, are so highly reputed.
I can only be astonished how much quality has improved with every new version of their drivers !
cMP2 Computer (XP minlogon) Intel E7400 cPlay039>Allocator>Lynx Two B. /192kHz throughout. 2x AcousticReality Ref. 202 & 2x AcousticReality Ref. 601´s ICEpower. Magnepan MG3.3R beechwood frames & custom stands. Miller chokes on Ribbons.
Follow Ups:
Yes its that time again.
There's a new range of 32nm Core ix-xxxx CPUs using a new socket (1155 from previous 1156). The exciting thing about this 2nd generation 32nm CPU is lower power consumption and improved performance - everything is integrated into a single 32nm die. If my memory serves me correctly, 1156 based Core ix CPUs & mobos required more 5V load (for QPI interface component). This is done away with. New as well is Intel's AVX instruction set allowing for 256 bit processing which is NOT supported in XP. For the enthusiasts, more information on Intel's Sandybridge can be found here .
Gigabyte's H67 chipset based mobos will support these CPUs: GA-H67MA-UD2H which offers no PCI slots! H65/7 based mobos that do provide PCI support does so using a separate PCI/PCIe chip which is not ideal. Intel will offer PCI support for Q61/5/7 chipsets - problem is finding a mobo that uses these.
What is not clear is chipset support for Intel's 22nm CPUs (Ivy-bridge) which will use the 1155 socket. This 22nm shrink of Sandybridge would yield even greater efficiencies but ideally we don't want to get another mobo.
I want to get the Lynx AES16e to try with this new hw. Will it improve on current hw specs (Core i3-530 + GB-H55M-UD2H) is the big question? I would recommend avoid using the PCIEx16 slot (which runs off the CPU). PCIEx16 is very fast indeed but I suspect for audio it will not be a good choice as the CPU is powered using multiple power phases (previous mobo uses 4 whilst new one goes to 8). Instead use other PCIe slots (running off H67 chipset). This is why I'm not keen on mini-ITX mobos as they only offer a single "noisy" PCIEx16 slot.
CPU option would be lowest spec Core i3-2100 @ 3.1GHz (K spec) - avoid S & T spec CPUs. BIOS would be very similar to current setup.
Hi cics! You already tried a new Sandybridge platform?
http://cmp2-mihaylov.narod.ru/
It will be very interesting.Price And Release Day Of Intel Sandy Bridge Processor Confirmed
http://cmp2-mihaylov.narod.ru/
Edits: 12/21/10
I see that many of these chips are rated at 65watt TDP.
Would chips with more Cores and/or more Cache work better for audio ???
Thanks,
Tim
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: