|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
68.43.143.212
In Reply to: RE: You are welcome! posted by jackwong96 on July 02, 2010 at 10:01:21
Please do tell the story. For your info in my system I use passive crossover for my high frequencies (I think its a 12 db octave rolloff below 125 hz, it came with the speakers). For the bass I run part of my Buf32s output into a Behringer electronic crossover then from the Behringer directly to my mid bass and subwoofer amps.
Follow Ups:
Twenty odds years ago, I saw an audio electronics practitioner, who was my tutor, setting up a pair of speakers for a customer. At that time, I already have basic knowledge on setting up speakers and successfully built several pairs of speakers. I saw him using long chains of resistor to level the mid-range and tweeter. The chains of resistor consisted of various values, but strange enough, I found some values as small as 0.01 and 0.05 ohm.
I was curious as to why standard values couldn’t be used. He told me that standard values such as 0.1 ohm was far from ideal for setting up speakers; in order to achieve best accuracy 0.01 ohm was required. He also stressed that when perfect balance was achieved, either adding or removing a 0.01 ohm resistor would spoil the perfection and it would sound distinctly bad upon comparison.
Although he was a very experienced audio practitioner, I was very doubtful about his theory and had a lot of questions. Why I haven’t heard about that before? Why hi-end speakers weren’t built that way? Were human ears so sensitive to be able to distinguish the difference made by a 0.01 ohm resistor (equivalent to a piece of wire) on a tweeter or mid-range?
If what he said about cross-over leveling was true, all cross-over in commercial speakers would be inaccurate because only standard value resistors were used.
Guys, what do you think?
I don't know. What I do know is I want to hear part 2.
I don't know either. Hope there are only two parts so don't have to keep us in suspense!
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: