|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
90.19.150.201
In Reply to: RE: cMP - Gigabyte mainboard problem posted by alba63 on November 01, 2009 at 05:26:57
I used cPlay in some during some early experiments before I finally assembled my dedicated computer and I was concerned by its very basic interface, its lack of library facilities and its refusal to work with every cuesheet. I wanted to see if I could get acceptable results from Foobar once I had a good hardware setup. As it’s turned out, the sonic benefits of cPlay are rather substantial.
I’ll probably change my RAM to something smaller. I wasn’t sure if 256Mb would be ok for Foobar, so I played safe to begin with.
What I really need at the moment is to be able to boot with something better than 200Mhz and 1v.
Follow Ups:
What I have experienced is that when my pc resets bios it sometimes resets all settings (not just MIT). When I disable and reset per Cics specs then I can lower clock and voltage. Check out your bios.
What I have experienced is that when my pc resets bios it sometimes resets all settings (not just MIT). When I disable and reset per Cics specs then I can lower clock and voltage. Check out your bios.
Yes, indeed many BIOS, and also some Windows settings had to be redone. But after the first time you do that quicker than the first time....
And thanks to this forum (!) and the cMP2 HomePage and the engagement of cics I now have a dirt cheap audio PC that delivers excellent sound, better than anyting I had previously heard out of a computer...
regards
Bernie
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: