Audio Asylum Thread Printer
Get a view of an entire thread on one page
|For Sale Ads|
In Reply to: RE: Not with any version of Picore on my Digi+ Pro posted by Batman on April 18, 2017 at 16:27:13
or a bug in software when you select HiFiBerry Digi+ Pro from the audio output menu in Squeezelite settings?
PiCore and RPI apparently don't play well together
I tried disabling the Bluetooth to no avail
I presume they'll work it out eventually.
It's just the Digi+ Pro with WiFi....... I have 5 Digi+ Rpi's around the House running just fine - 3 with WiFi.... I also have an Rpi with the Digi+ Pro board running with Ethernet just fine........ Every Rpi I have is running PiCorePlayer!
Hook a long Ethernet Cable to your RPi until they get a fix..... Forget WiFi for your Main System anyway... Always use an Ethernet Cable. I only use WiFi for the Radio and Back round music....
I did. It's connected via a short Ethernet cable to a wireless extender sitting right behind it. It sounds so much better than the SB Duet it replaces because the Duet downsamples 96MHz files to 48.
It's probably just some code that they need to add to support the Digi+ Pro..... Only a guess on my part though.
For PiCorePlayer it looks like their firmware for wifi gets kicked out and is unable to load when the Digi+ Pro is connected.
I looked in the modprobe.conf file and none of the wifi firmware is listed.
Looking back at PiCore it looks like this problem comes and goes with different releases. They will likely fix it 'again'
In the mean time I did get a WiFi Dongle to work using DietPi with the Digi+ Pro connected. Works perfectly!
Dynobots Audio - Music is the Bridge Between Heaven and Earth
Post a Message!
This post is made possible by the generous support of people like you and our sponsors: