Audio Asylum Thread Printer
Get a view of an entire thread on one page
|For Sale Ads|
In Reply to: RE: You may have a hardware problem.....................nt posted by Cut-Throat on April 15, 2017 at 07:50:31
Install Nooks and see if RPI works
Do you only Have 1 Rpi ? ...... Do you have a friend that may have one, that you could use on your network..... Or buy another one?
Lots of ways to troubleshoot, but it appears that your WiFi is not working on your Pi....
May be so, I removed the Digi+Pro card and set picore for usb audio output still no wifi.
I also did the hack to turn Bluetooth off.
Currently downloading NOOBS/raspbian to see if it's a problem with PCP. SD card preesently reformatting.
Very frustrating but I'll perservere.
I installed Raspbian and sit here typing on the Raspbian web browser connected to my wireless network! DIGI+Pro card is still connected too.
Not sure what next but I'm going back to PCP and enjoy some tunes over Ethernet :-)
Now that you know everything is working hardware wise, you can just etch a new PcP onto your card and go from there.
Not sure what the setting was that was causing your problem, but if you take it slow, one step at a time, I'm sure you'll get it working.
I have 3 working wireless, all running 3.11 Audio Version.....
Edit: ---- But they all have the Digi+ Board not the Digi+ Pro ...... So, maybe the Pro Version has a problem with Wireless with PiCorePlayer ??
Post a Message!
This post is made possible by the generous support of people like you and our sponsors: