|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
206.255.198.169
In Reply to: RE: Raspberry Pi Media Player Software Options posted by jaydacus on March 30, 2017 at 05:18:16
I learned of two of his suggestions that I use:
1. Turn off HDMI output by setting "hdmi_blanking=2" in /boot/config.txt. I used wordpad on my PC to maintain Linux based CR convention.
2. Enable large buffer either in config.txt or directly in PcP's buffer section: -b 20000:600000
While I have an inexpensive linear power supply, I found that I prefer using one of my three phone chargers. Some time ago, I cobbled together a cable with USB at one end and a standard round jack used by the SBT. I had to purchase a micro USB adapter from Amazon to use it with the Pi.
Follow Ups:
It seems that I could disable HDMI from the Tweaks page of pCP setup (HDMI power = Off). Do I still have to edit /boot/config.txt?
I wasn't aware of that PcP setting which likely does the same thing.
I just followed SC's command line suggestion.
I was wondering why you said you had to pull the SD Card......
Cut-Throat
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: