|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
76.127.41.145
In Reply to: RE: Accessing music files via wireless posted by Cut-Throat on January 23, 2017 at 14:39:58
If it is available with the Pi, 1/8 TRS female out would work. I have a cable with 1/8 TRS male to two 1/4 TR males that hook into my system. I already use this for my Sony digital recorder.
Digital or coax out would also work.
What are other alternatives?
Follow Ups:
I would go with the Digital Output, either Coax or Optical... You have to add a board to the Rasberry Pi.... I use the Hifi Berry Digi+ --- And I included this in the $100 Price Tag.... Link below... It fits on top of the Pi Board with 4 screws... No soldering at all.. very simple
Cut-Throat
Thanks again for your time and expertise -- much appreciated! Looks like there are 3 boards. Which would be best for only streaming?
And should I get a cover for the Pi, or is this unnecessary? It is fairly dusty where I live (near Santa Fe in northern New Mexico).
I'd get the cheapest Board and use the Optical Output - They'll all work pretty much the same... I like the Acrylic Case so you can see the blinking LEDs inside. :-)
Cut-Throat
Sounds excellent. Best to order everything from HiFiBerry? And are there instructions on how to setup wifi without using a monitor on the Pi?
Ordering everything from HiFiberry will work fine.... I used a monitor on my desktop using PiCorePlayer Website.... I did not find instructions, but just plugged an ethernet cable into the raspberry Pi and then Set up everything for wireless on the desktop. Then unhooked the Ethernet cable and saw the Pi on the desktop.
Cut-Throat
The gear arrived this afternoon, and everything is hooked up. The RPi powers on, and it has been assigned an IP address by my router.
But when I type in the IP address in my browser, it cannot connect.
Any ideas??? Thanks!
OK, and thanks again! It might actually be better for me to use the 1/8 jack analog output for the Pi, since the correct cables are already plugged into my sound processor. Does this come with the default unit? If so, then I will not need an additional board with optical output.
Or will using the 1/8 jack result in lower audio quality?
You can try the audio jack (it is pretty good), and always add the Digital Out board later...... Not a big deal either way. You may want to visit this forum to see what others are doing with LMS on UNIX..... http://forums.slimdevices.com/forumdisplay.php?3-Linux-UnixCut-Throat
Edits: 01/24/17
Thanks! I found this how-to guide. Seems fairly simple, and pre-editing the config file to add wireless is a great idea.
OK, you're on your way.... I briefly skimmed the Project you linked to.. Be aware that you don't need to buy a Wireless adapter as it is now built into the Raspberry Pi 3.
Cut-Throat
Excellent! I will go with the digi+ board and optical connector for the best possible audio quality.
I also think that the built-in audio board will need to be disabled, but perhaps that can be done via the config file.
Which case would you recommend? I don't really want the clear one, as blinking LEDS would most likely be distracting whilst listening.
You don't have to disable the other audio at all...it might even be done by enabling the Digi+ Board by the folks that put together PiCorePlayer...don't know.
If you get the Digi+ Board you should also get a case from HiFiBerry, as it needs to accommodate the Digi+ Board. I only have experience with the Clear Case.... I have 5 Raspberry Pi's, and use the Acrylic case on all of them. The Little LEDs are not that distracting.
Cut-Throat
Finally have LMS running on my desktop computer! I installed it via the command line, and discovered that I need to access it via a web browser -- doh! Still don't know how it will work with the Pi, but that's part of the new adventure!
Will get the acrylic case for the Pi. It looks easy enough to get it working with the two boards.
Thanks again for your wonderful assistance!
Glad to hear you got it working!
You will love how LMS works with the Pi !! .... You will also discover that there is quite a network of developers that have custom Pluggins into LMS, that make it a very powerful platform.... Go to the 3rd party software forum on the link I gave you earlier...
Cut-Throat
I am just about to place my order. Wondering what android apps I can use to control the Pi?
Will have a look at the third-party additions to LMS. And I am certain there will be more questions once the new gear arrives!!!
Thanks again for everything!
A really Great Android App is Squeeze Ctrl. I think it's $5.
Link Below
Here is my Raspberry Pi and my Old SBT. (Now Sold)
Cut-Throat
Just placed my order. Your photo of the Pi and acrylic case makes the 10-day wait seem even longer!
And thanks for the Squeeze Control recommendation.
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: