Welcome! Need support, you got it. Or share your ideas and experiences.
Return to Planar Speaker Asylum
It`s done a friend helped me measure the resonant peak, which was about 4-5db at 40hz. The LCR network to get this flat is 18mh in series with 900uf in series with 5.6ohm across the bass speaker, in the Monolith`s case it`s easy to fit outside as the xover is outside the box.
These values for the LCR are for my speakers which are 100% stuffed this may vary from the standard which is only 30% stuffed.
Anyhow the bass is now tight smooth and dynamic, much different to the standard one note bass the the Monoliths had.
One day i may do the standard measurements, but i like the detailed tight sound of an overdamped, low Q bass, it suits my not so large listening room.
Cheers george
![]()
Follow Ups:
The network equalizes out the motional impedance of the driver, effecting the crossover, just trust me you will not go back after it`s inserted, and it`s the same for the standard amount of stuffing as well, i`ve just tested it.
Cherrs George
![]()
♪ moderate Mart £ ♫ ☺ Planar Asylum
![]()
- here
♪ moderate Mart £ ♫ ☺ Planar Asylum
![]()
This post is made possible by the generous support of people like you and our sponsors: